Swim N Spa Balancer: pH Plus (5 LB)

ACTIVE INGREDIENT:
Sodium Carbonate................................100%

SPA INSTRUCTIONS
This product should be used if pH is below 7.2.
1. Turn on air blower, jets or lter system.
2. Premix 1 oz. of this product with water in plastic pail and add
diluted product to spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of
7.2-7.6 and 80-140 ppm respectively.

NOTE: Always wait 30 minutes between doses and test water before
each addition of this product.

POOL INSTRUCTIONS
Test for pH with a reliable test kit. If the pH is low (7.2 or below) add this
product according to the chart below. Pre-dissolve this product in a
plastic pail and slowly pour around the perimeter of the swimming pool
while the circulation system is operating. Allow system to operate for 1
hour after application. Retest the pH. If pH is still low, repeat this
process until the pH reaches 7.4-7.6.