Chemicals

NOTE: CALCIUM HARDNESS INCREASER CAN NOT BE SHIPPED TO CALIFORNIA!

Swim N Spa Calcium Hardness Increaser is used to increase the calcium hardness in spas and hot tubs
with low levels of hardness. Low hardness levels will etch plaster and
corrode equipment. Before adding this product, test the water with a
calcium hardness test kit or ask your local spa dealer. The ideal hardness
level is 200-400 ppm (parts per million).

NOTE: Swim N Spa Calcium Hardness Increaser is equivalent to Spa Breeze Hardness Plus

Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.

NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!

Swim N Spa pH Minus is used to lower the pH in pool and spa water. The water should be maintained at a pH
of 7.2-7.8 and total alkalinity from 80-140 ppm. Test water frequently with suitable test kit to ensure
proper pH is maintained. This product is compatible with all sanitizers including bromine, chlorine and
biguanide.

NOTE: PH MINUS CAN NOT BE SHIPPED TO CALIFORNIA!

pH increaser for spas raises the pH level in hot tubs. (1 lb)

NOTE: Spa Choice pH Increaser is equivalent to Spa Breeze pH Up & Swim N Spa pH Plus

For natural, clear water in your pool, spa or hot tub, this
product aids in the removal of particles too small for the
filter to remove. This product works on dirt, organics and
oils to rapidly clear your pool or spa.

NOTE: TOTAL ALKALINITY INCREASER CAN NOT BE SHIPPED TO CALIFORNIA!

Critical to alkalinity control, this granular formula effectively raises alkalinity
levels which might otherwise cause equipment corrosion. Swim N Spa Total Alkalinity Increaser is a
special compound used to increase the total alkalinity in pool or spa water.

Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.

NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!

Reduces the loss of chlorine in pool and spa water caused by the ultraviolet rays of the sun.

NOTE: SWIM N SPA STABILIZER CONDITIONER CAN NOT BE SHIPPED TO CALIFORNIA!

Liquid Increase pH  for spas raises the pH level in hot tubs. (1 qt)