Swim N Spa Balancer: Liquid Stabilizer & Conditioner (1 GL.)

ACTIVE INGREDIENTS:
Cyanuric Acid..................................24.92%
INERT INGREDIENTS:.................75.08%
Total........................................................100%

DIRECTIONS
Use a reliable test kit to determine stabilizer concentration in water. If the pool water tests less than 40 ppm (parts per million), add
this product to obtain a level of 40-100 ppm. One gallon container will raise a 10,000 gallon pool’s stabilizer concentration 32 ppm.
1. Turn on circulation pump.
2. Shake product well before use.
3. Slowly add entire gallon of Liquid Stabilizer & Conditioner to the pool in front of a return jet.
4. Rinse container with pool water and shake. Repeat step #3.
5. Re-balance your swimming pool in accordance with the guidelines below.

NOTE: It is normal for the pool water to become cloudy following application for a short period of time. Allow 30 minutes for the pool to clear.

• Maintain pH in the range of 7.4 to 7.6.
• Maintain total alkalinity in the range of 60 to 120 ppm.
• Maintain calcium hardness range between 200-400 ppm.
• Maintain available chlorine level at 2-4 ppm.