Chemicals

NOTE: CALCIUM HARDNESS INCREASER CAN NOT BE SHIPPED TO CALIFORNIA!

Swim N Spa Calcium Hardness Increaser is used to increase the calcium hardness in spas and hot tubs
with low levels of hardness. Low hardness levels will etch plaster and
corrode equipment. Before adding this product, test the water with a
calcium hardness test kit or ask your local spa dealer. The ideal hardness
level is 200-400 ppm (parts per million).

NOTE: Swim N Spa Calcium Hardness Increaser is equivalent to Spa Breeze Hardness Plus

Learn More

Swim N Spa pH Minus is used to lower the pH in pool and spa water. The water should be maintained at a pH
of 7.2-7.8 and total alkalinity from 80-140 ppm. Test water frequently with suitable test kit to ensure
proper pH is maintained. This product is compatible with all sanitizers including bromine, chlorine and
biguanide.

NOTE: PH MINUS CAN NOT BE SHIPPED TO CALIFORNIA!

Learn More

Swim N Spa Spa First Step eliminates water discoloration caused by mineral and scale deposits in spa water. Also helps to remove deposits that have already formed. Learn More

Swim N Spa Spa Protect eliminates water discoloration caused by mineral and scale deposits in pool and spa water. Also helps filter remove suspended particles that causes cloudiness. Learn More

Swim N Spa Filter Renew liquid filter cleaner greatly improves filter life and efficiency. It is specially made to cleanse suntan oil, and grease as well as scale and mineral deposits from pool and spa filters of all types: cartridge, sand, and D.E. Regular use of this product will assure proper filtration. Learn More

Swim N Spa pH Minus is used to lower the pH in pool and spa water. The water should be maintained at a pH
of 7.2-7.8 and total alkalinity from 80-140 ppm. Test water frequently with suitable test kit to ensure
proper pH is maintained. This product is compatible with all sanitizers including bromine, chlorine and
biguanide.

NOTE: PH MINUS CAN NOT BE SHIPPED TO CALIFORNIA!

Learn More

Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.

NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!

Learn More

NOTE: TOTAL ALKALINITY INCREASER CAN NOT BE SHIPPED TO CALIFORNIA!

Critical to alkalinity control, this granular formula effectively raises alkalinity
levels which might otherwise cause equipment corrosion. Swim N Spa Total Alkalinity Increaser is a
special compound used to increase the total alkalinity in pool or spa water.

Learn More

Swim N Spa Foam Away eliminates annoying foam build-up in pools, spas, hot tubs, fountains or where foam can be a problem. Learn More

For natural, clear water in your pool, spa or hot tub, this
product aids in the removal of particles too small for the
filter to remove. This product works on dirt, organics and
oils to rapidly clear your pool or spa.

Learn More

This product forms a thin layer of protection on the surface of your pool/spa. When used bi-weekly, this product will prevent excessive water evaporation, minimize heat loss and reduce the amount of chemicals needed to maintain your pool or spa. Learn More

Swim N Spa Refresh is a non-chlorine shock treatment for hot tub and swimming pool water. A non-chlorine shock treatment that eliminates odors and reduces irritating contaminants for fresh, clean, clear water. Shocking with Refresh will oxidize the materials that may cause foul odors, eye or skin irritation or dull, cloudy water. Use weekly to increase the sanitizer's effectiveness.

NOTE: REFRESH CAN NOT BE SHIPPED TO CALIFORNIA!

Learn More

Swim N Spa Pool Protect eliminates water discoloration caused by mineral and scale deposits in pool and spa water. Also helps filter remove suspended particles that causes cloudiness. Learn More

Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.

NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!

Learn More